Dragons in A/B/C Rig

The Dragon Force RG65 by Joysway is an RG65 class-ready boat.

It is inexpensive, mass produced, and has become one of the fastest selling RC sailboats in recent history. The Dragon Force comes completely ready-to-race out of the box, including installed servos, electronics, and radio.  This makes it  easy and simple to do what is most important in our sport... SAIL!!! 

Better yet, it is very well designed for a mass produced  kit boat boat. Based on Mark Dicks successful "Ice" Open RG65 design, the DF is not a shrunk down version  of popular Cup boat that struggles to sail well.  It has quality parts, rigs and characteristics available in many RC Sailing classes that make it a very good sailing boat out of the box. Up to date compenents like carbon fiber rigs, ball raced gooseneck, and watertight construction set it apart from other entry level boats.  In fact,  the DF  weighs in at about 1200 grams  making it very comparable to most of its Open RG65 cousins! Depending on the RG65s in your area you can race it as an RG65 or as a One Design class boat.

The Dragon Restricted Class Rules give a good set of guidelines for clubs wishing to race this boat as a strict one design class. RG65 USA supports DF Restricted Class racing and will help organize a  DF Restricted Class Championship in conjunction with the RG65 National Championship  annually!

The Dragon Force Resource Center is designed to be a portal for information to build, optimize, race, and troubleshoot  your Dragon Force RG65 !! 

Contributions to this area are welcome !! Use our  Contact Page to upload files , or add info to this section! Happy Dragoning!

Resource Center

A Brief Dragon Force History

The story so far by Mike Weston

After a discussion with John Wesley (Ripmax rep) some 3 years ago I tested the original Joysway fleet (Caribbean, Fiesta & Discovery) that were all typical mass produced model yachts – heavy, over-rigged, unbalanced etc. Mark Dicks & John Tushingham were called aboard & we all met at Swanley Park using a Micro Magic & 2 RG65 yachts we demonstrated what a decent designed yacht could do - running rings around the Joysway fleet. Suitably impressed John Wesley asked us to design a radio racing yacht for Joysway to mass produce. We only had 6 weeks to produce a design & for this reason we went for a current class & design – the Mark Dicks RG65 “Ice” modified with its transom slightly pinched in.

With Ripmax, I met the Joysway team (Stanley, Johnson & Giggs) at the Nuremberg Toy Fair in February 2012 to discuss the project & explain exactly what was required for a radio racing yacht. With new design & a RG65 Ice in hand Joysway dually went back to China & we waited in anticipation for what would arrive later in the year.

We received the first prototype late 2012 – blow moulded, random fin box/mast housing unit & rudder housing unit – we took a step back to appreciate what had turned up. The fin was in line with rudder & all in line with the mast, mast slider to adjust rake, shroudless rig, rotating the mast ball race kicker/gooseneck fitting etc. etc. – almost there!! The hull was a bit heavy & ballast was slightly too far back as the transom was in couple of mm – but what a good job Joysway had done & what a totally new look at the engineering of a hull. We then asked if the hull could be made lighter & whether the ballast could be moved further forward – two further hulls arrived but these were too light and started falling apart but it was too late to change the ballast so we suggested that the batteries could be housed by the fin box so as to bring the weight forward.

We all met again at Nuremberg Toy Fair February 2013 where the DF65 was displayed for the first time on the Ripmax stand & to discuss any further modifications that might be required. We all celebrated that evening & this went on to the early morning - very messy. The first batch arrived in May which now in full production had a couple of issues mainly a few were very weak at the top of the bow needing reinforcement. The second batch had a modified bow which eliminated the problem & different bow elastic sheeting fitting. The third version is now in production - this has a plastic servo tray & modified switch. Two other improvements are in the pipeline – all metal main boom compression strut for easier construction/adjustment & mast/boom support rings to stop them splitting. These will not improve the performance of the yacht only the construction.

Unfortunately John Wesley passed away just after the Toy Fair but he did at least see the DF in production form – he will be sadly missed & we have named the UK DF National trophy in his honour.

We envisaged a few issues with the DF65 as part of the RG65 class & the problems of a class within a class – the DF would be at least 120 grams heavier & would not compete the development RG’s. As stated before, because of the timescale issues we needed a ready available class/design & recognised the RG65 class & Marks “Ice” as the best option. You can sail the DF as an RG65 with swing rigs, high aspect sails & make as many modifications as you like – you can also sail within the restricted rules making the DF an affordable option with close performance sailing – you can also make your own rules as its your yacht.

I would like to thank John Tushingham for all his time & effort into the concept of the DF & work on the class rules.

This is ours & Joysway first attempt at producing a radio racing yacht & although not perfect defiantly big improvement to the normal toys & defiantly value for money. As stated before – your constructive criticism is welcome.

May your force be with you!!